Foreword:

Anti foaming agent could easily disperse in ceramic glaze pulp or printing medium, good self-emulsify property,long lasting defoaming effect.Specially suitable to use in obstinate foaming system with multiple surfactant,won’t cause fish-eye bubble spot or pin hole.

Advantages:

◆ Low dosage,strong defoaming effect,no residue or precipitate after application.

◆ Won’t cause bad effect on ceramic glaze pulp or influence the quality of final product.

◆ Maintain smoothness of ceramic surface,prevent defects caused by foam.

◆ Stable chemical property,resistant to heat and oxidation.

I.Product code: GA-415

II. Appearance: light yellow liquid

III.Product application: suitable to apply in ceramic glaze pulp and printing medium.

IV.Use method: General dosage is 0.1‰-3‰,adjust the percentage according to different foaming system.It is suggested to dilute the anti foaming agent with some water or working liquid,then mix well with glaze pulp or printing medium by stirring.

V.Storage: keep sealed and store in cool and dry place,avoid direct sunlight.

VI.Packaging: 25kg/barrel