PRODUCTS

WEBSITE : HMOE > PRODUCTS>Printing Medium

Printing medium paste PM-9610

Main Features
※It is easy to use, grind or mix well with printing powder, then put on the producing line.
※Nonpoisonous composition , the lubricity is specially good, can reduce wipe screen times , not drying up nor sticking screen.
※Perfect printing result, the design is clear and tough, can be used for multiple screen printing.
No precipitate after long term storage.Will be burned out after firing , does not influence the color and luster ;


Fine printing medium


1、Product Code:  PM-9610、PM-9400
2、Products Useage:
1、Suitable for single & double firing floor and wall tiles.
2、The printing effect is especial good ,the pattern is at most obvious for those kind of design: the marble line , wooden stripe,  layer gradually, relief, and large scale printing.
3、Use Method:
1. Reference compose percentage is printing medium 100% , printing powder 30% (30-50%), pigment as demand, the dry materials(powder&pigment) quantity upon to design and printing status make adjustment;
2. The screen adopt 150 mesh or permit more higher range for choice.
4、Product Features:

Appearance: Thick paste , flowing


ProductCode

Viscosity

Density

Dry speed

Description

PM-9610

9000+500mPa.s

1.03+0.01

4-5S

Having the best intensity , fluidity , lubricity , moisturizing performance ,

permeate the screen is good, suitable for printing a large area design.

PM-9400

5500+500mPa.s

1.03+0.01

3-4S

Having good intensity , fluidity , lubricity; medium moisturizing performance .

permeate the screen is good,can be used in printing a large area design.


[Prev]    [Return]    [Next]

SERVICE-LINE

86-757-82266519

SERVICE