PRODUCTS

WEBSITE : HMOE > PRODUCTS>Latest Products

Tile adhesive GA-111


Forword


When paving tiles or stone on wall,problems of hollowing in different extent and tiles loose then falls off often bother the builders.While the tile adhesive in the market varies considerably in quality.The tile adhesive we supplied has good adhesion,easy in use and low cost,and most important of all,it could overcome the problem of hollowing.


Advantages compared with normal tile adhesive:

1. Less using amount, lower cost.

2. Convenient in transportation and lower cost.

3. Avoid hollowing in construction effectively.

4. Shows better cohesive strength performance in water based on massive experiments.

5. Good storage property.No cement content,will not lose effect by absorption of moisture.


Product features:

Polymer type

Styrene and acrylate polymer

Appearance

Milky white liquid

Solid content

52%-53%

PH value

7.0-9.0

Viscosity

0~500 cps

Particle diameter

0.2~0.3µm

Minimum temperature of film forming

< 0℃

Ionicity

Anion

Validity period

12 months in room temperature



Method of application:

1.Clean the back of tile,assure there is no dirt,oil or wax.

2.Brush the adhesive on the back surface evenly .

3.Wait untill the adhesive become half dry and semitransparent,then cover with wet cement mortar(cement:sand=5:5).

4.Pave the tile on wall with wet cement mortar in common way.



Attentions:

1.Our tile adhesive is water based latex,please apply in 5℃ aboved enviroment,and avoid rainny day construction.

2.Suggested proportion of cement and sand range between 5:5 and 7:3.Pure cement is not suggested as bonding material.

3.Propose to use on interior wall.


Application range:

Tiles,mosaic,cultural stone,etc.


P.S.:

The above is typical information of our product,with guide line of the product features and appliction suggested.Please confirm with small tests before scale application.



Packing details: pack in 5 kg plastic buckets.


[Prev]    [Return]   

SERVICE-LINE

86-757-82266519

SERVICE